Oxygen Products

Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 2L at 200bar Cylinder size 45cm * 10cm Cylinder content 0.42m3 Our cylinders are equivalent to 7 x 600ml disposable cylinders or 4 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide

Trade Gas, Rent Free, Oxygen Gas 20L 200bar, Refill only Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 20L at 200bar. Cylinder size 95cm * 20cm Cylinder content 4m3 They use the same regulator fittings as BOC, Air products and Air liquid

Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 50L at 200bar. Cylinder size 160cm * 20cm Cylinder content 10.0m3 They use the same regulator fittings as BOC, Air products and Air liquide

Flame / GC Optical purging/IR Venturi effect and Nebulisation/LC-MS Instrument air

In addition to its use as a respiratory gas by the healthcare industry, oxygen has strong oxidising properties that can benefit many industries by improving yields, optimising performance and lowering costs. Applications such as combustion, oxidation and fermentation can benefit by enriching or replacing process air with oxygen.

On exchange each Regulator is examined FOC.

Albee Plus is for those who need larger gas volume but still require the mobility.

Industrial oxygen not for medical use.

In its most well-known form (it constitutes 21% of the atmosphere), it is a tasteless, odourless and colourless gas essential to life.

The Ultra oxygen cylinder is perfect for the professional user, it's huge capacity and contents gauge means you're much less likely to run out over that busy weekend. Combined with a fuel gas - there are so many applications you can perform - cutting steel, soldering brass, welding steel.99.5% Oxygen

Industrial grade oxygen is commonly used with a fuel gas for cutting, welding, brazing and soldering as it supports combustion and gives much higher flame temperatures than if air is used. For cutting with oxygen an oxy-fuel flame preheats the steel to its ignition temperature further to which gaseous oxygen flows onto the red-hot steel, generating more heat and melting the steel.

This gas is commonly and traditionally used with a fuel gas (propane, acetylene or propylene) for cutting, welding, brazing and soldering. Oxygen supports the combustion of these gases and enables a much higher flame temperature to be achieved in comparison with air.

This gas is commonly and traditionally used with a fuel gas (propane, acetylene or propylene) for cutting, welding, brazing and soldering. Oxygen supports the combustion of these gases and enables a much higher flame temperature to be achieved in comparison with air.

This gas is commonly and traditionally used with a fuel gas (propane, acetylene or propylene) for cutting, welding, brazing and soldering. Oxygen supports the combustion of these gases and enables a much higher flame temperature to be achieved in comparison with air.