Home >
Find a Stockist >
Product Results
Propylene is a blend of gases. Oxygen & Propylene burns hotter than Oxygen & Propane and can be used for Fusion Welding, Brazing, Silver Solder, Heating & Cutting.
Propylene is a blend of gases. Oxygen & Propylene burns hotter than Oxygen & Propane and can be used for Fusion Welding, Brazing, Silver Solder, Heating & Cutting.
Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 9L at 137bar Cylinder size 76cm * 15cm Cylinder content 1.2m3 Our cylinders are equivalent to 21 x 600ml disposable cylinders or 13 x 1L disposable cylinders They use the same regulator fittings as BOC, air products and air liquid
Carbon Dioxide 6.35kg Including Refundable deposit 99.9% CO2 MIG (MAG) Welding Mild Steel Material Thickness 1mm – 14mm+ Used in dip transfer on thin and galvanised materials. Recommended for some core wires Cylinder size 84cm * 14cm They use the same regulator fittings as BOC, Air products and Air liquide
Hobby Gas CO2 / Argon Mix 20 : Cylinder content 9L at 137bar Cylinder size 76cm * 15cm Cylinder content 1.2m3 80% Argon , 20% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 6mm – 14mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. Our cylinders are equivilant to 21 x 600ml disposable cylinders or 13 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide
Hobby Gas CO2 / Argon Mix 5 : Cylinder content 9L at 137bar Cylinder size 76cm * 15cm Cylinder content 1.2m3 95% Argon , 5% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 1mm – 8mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. They use the same regulator fittings as BOC, Air products and Air liquid
Carbon Dioxide 3.15kg Including Refundable Deposit 99.9% CO2 MIG (MAG) Welding Mild Steel Material Thickness 1mm – 14mm+ Used in dip transfer on thin and galvanised materials. Recommended for some core wires Cylinder size 52cm * 13cm They use the same regulator fittings as BOC, Air products and Air liquide
Carbon Dioxide 6.35kg refill 99.9% CO2 MIG (MAG) Welding Mild Steel Material Thickness 1mm – 14mm+ Used in dip transfer on thin and galvanised materials. Recommended for some core wires Cylinder size 84cm * 14cm They use the same regulator fittings as BOC, Air products and Air liquid
Argon - Cylinder content 9L at 137bar. Cylinder size 76cm * 15cm Cylinder content 1.2m3 99.99% Argon MIG (MAG) Welding Stainless Steel material thickness 1mm – 12mm Used for thin and medium sections. Good arc control, used with or without pulse. TIG Welding Stainless Steel Material Thickness 1mm – 8mm For use on thin materials. This has a stable arc with easy starting. Suitable for all grades of materials Our cylinders are equivilant to 21 x 600ml disposable cylinders or 13 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide
Porta Gas, Rent Free, 20% CO2 / Argon Mix Refill 2L 200Bar. Refill only Cylinder content 2L at 200bar Cylinder size 45cm * 10cm Cylinder content 0.42m3 80% Argon , 20% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 6mm – 14mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. Our cylinders are equivilant to 7 x 600ml disposable cylinders or 4 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide
Porta Gas CO2 / Argon Mix 5 : Cylinder content 2L at 200bar Cylinder size 45cm * 10cm Cylinder content 0.42m3 95% Argon, 5% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 1mm – 8mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. They use the same regulator fittings as BOC, Air products and Air liquide
Carbon Dioxide 1.5kg refill 99.9% CO2 MIG (MAG) Welding Mild Steel Material Thickness 1mm – 14mm+ Used in dip transfer on thin and galvanised materials. Recommended for some core wires Cylinder size 45cm * 10cm They use the same regulator fittings as BOC, Air products and Air liquide No bottle rental
Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 2L at 200bar Cylinder size 45cm * 10cm Cylinder content 0.42m3 Our cylinders are equivalent to 7 x 600ml disposable cylinders or 4 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide
Argon Cylinder content 2L at 200bar. Cylinder size 45cm * 10cm Cylinder content 0.42m3 99.9% Argon MIG (MAG) Welding Stainless Steel material thickness 1mm – 12mm Used for thin and medium sections. Good arc control, used with or without pulse. TIG Welding Stainless Steel Material Thickness 1mm – 8mm For use on thin materials. This has a stable arc with easy starting. Suitable for all grades of materials Our cylinders are equivilant to 7 x 600ml disposable cylinders or 4 x 1L disposable cylinders. They use the same regulator fittings as BOC, Air products and Air liquide
Carbon Dioxide 1.5kg Including Refundable deposit 99.9% CO2 MIG (MAG) Welding Mild Steel Material Thickness 1mm – 14mm+ Used in dip transfer on thin and galvanised materials. Recommended for some core wires Cylinder size 45cm * 10cm They use the same regulator fittings as BOC, Air products and Air liquide
Rent Free Industrial Gas, Carbon Dioxide 34kg, Refill only Cylinder content 50L at 200bar. Cylinder size 160cm * 20cm Cylinder content 34kg They use the same regulator fittings as BOC, Air products and Air liquide
We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. Cylinder content 50L at 200bar Cylinder size 160cm * 20cm Cylinder content 10m3 95% Argon , 5% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 1mm – 8mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. They use the same regulator fittings as BOC, Air products and Air liquide
We are seeking new stockists of Adams Gas rent free gas cylinders in vacant areas. For details of this exciting and positive opportunity, Please contact [email protected].
Trade Gas, Rent Free, 20% CO2 in Argon Mix (20L) – Refill Only We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. Cylinder content 20L at 200bar Cylinder size 95cm * 20cm Cylinder content 4m3 80% Argon, 20% Carbon Dioxide MIG (MAG) Welding Mild Steel Material thickness between 6mm – 14mm+ For use on thick section. Not generally used for pulse arc, but excellent with cored wires They use the same regulator fittings as BOC, Air products and Air liquide
Trade Gas, Rent Free, Oxygen Free (OFN) Nitrogen 20L 200bar, Refill Only We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. Ideal For Air conditioning engineers for purging systems and also for Car & Cart racing teams for tyre inflation Cylinder content 20L at 200bar Cylinder size 95cm * 20cm Cylinder content 4m3 They use the same regulator fittings as BOC, Air products and Air liquid
Trade Gas, Rent Free, Oxygen Gas 20L 200bar, Refill only Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 20L at 200bar. Cylinder size 95cm * 20cm Cylinder content 4m3 They use the same regulator fittings as BOC, Air products and Air liquid
Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit. Cylinder content 50L at 200bar. Cylinder size 160cm * 20cm Cylinder content 10.0m3 They use the same regulator fittings as BOC, Air products and Air liquide
Trade Gas, Rent Free, Pure Argon 20L 200bar Refill Only We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. TIG Welding Material thickness Cylinder content 20L at 200bar Cylinder size 95cm * 20cm Cylinder content 4m3 They use the same regulator fittings as BOC, Air products and Air liquide
We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. TIG Welding Material thickness Cylinder content 50L at 200bar Cylinder size 160cm * 20cm Cylinder content 10.0m3 They use the same regulator fittings as BOC, Air products and Air liquide
Trade Gas, Rent Free 5% CO2 in Argon Mix 20L 200bar, Refill Only We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. Cylinder content 20L at 200bar Cylinder size 95cm * 20cm Cylinder content 4m3 95% Argon , 5% Carbon Dioxide MIG (MAG) Welding mild steel Material thickness between 1mm – 8mm For use on thin materials. Low splatter and good weld appearance. Usable in all positions. Also suitable for pulsed arc and robotic use. They use the same regulator fittings as BOC, Air products and Air liquide
We have introduced this product specifically for our trade customers and as such can only be supplied to trade users and delivered to trade addresses only. Cylinder content 50L at 200bar Cylinder size 160cm * 20cm Cylinder content 10.0m3 80% Argon, 20% Carbon Dioxide MIG (MAG) Welding Mild Steel Material thickness between 6mm – 14mm+ For use on thick section. Not generally used for pulse arc, but excellent with cored wires They use the same regulator fittings as BOC, Air products and Air liquide
Rental free acetylene cylinders.
Name | Contents | Valve Type | Pressure | Dimensions |
---|---|---|---|---|
Acetylene | 9.6 ltr | 15 bar | 492 x 180 mm | |
Oxygen | 11 ltr | 200 bar | 590 x 178 mm |
Albee Plus is for those who need larger gas volume but still require the mobility.
Argon 85% & Carbon Dioxide 15%
Argon 85% & Carbon Dioxide 15%.
Rental free cylinders for welding gases.
Name | Contents | Valve Type | Pressure | Dimensions |
---|---|---|---|---|
Argon L11 | 2300 ltr | 200 bar | 590 x 178 mm | |
Argon L13.4 | 4100 ltr | 300 bar | 820 x 190 mm | |
Argon Mix L11 | 2550 ltr | 200 bar | 590 x 178 mm | |
Argon Mix L13.4 | 4430 ltr | 300 bar | 820 x 190 mm |
ALbee™ operate a rent free system for their small cylinders. You simply return your empty cylinder to an approved stockist and purchase a full one. - no rental- no fuss.
Hobbyweld supply a whole range of professional gases in rent free refillable cylinders. Click HERE to find stockists or the whole range of Cylinders.
Ideal for commercial site and blown air heaters. Also a favourite with outdoor caterers for use with LPG generators.
Argon/co2 mix for welding
Co2 for welding.
19kg refillable gas cylinder ideal for, roofing, industrial/commercial heating and domestic cooking. Also a favourite with outdoor caterers for use with LPG generators.
Hobbyweld 15 is a specific blend of 83% Argon, 15% Carbon Dioxide and 2% Oxygen, Great for MIG welding of steel between 5mm and 12mm thick,
This trimix shielding gas is great for heavier gauges of steel and is often used in engineering facilities for general metal fabrication. The increased percentage of carbon dioxide in this mixture allows you to weld up to 18mm in steel thickness.83% Argon / 15% Carbon Dioxide / 2% Oxygen
Hobbyweld 5 original is a mixture of 93% Argon, 5% Carbon Dioxide and 2% Oxygen, Ideal for MIG welding of steel less than 5mm thick eg car panels.
The Hobbyweld 5 Ultra cylinder is perfect for welding mild steel under 7mm, combined with the increased gas capacity of the Ultra cylinder makes it ideal for much larger projects.93% Argon / 5% Carbon Dioxide / 2% Oxygen
Hobbyweld Stainless 98/2 is a blend of 98% argon and 2% carbon dioxide, this provides an entry level gas for those welding stainless steel below 8mm. 98/2 provides greater fusion and welding characteristics than if pure argon is used. This gas is suitable for MIG welding stainless steel.
Acetylene is perfect for general welding, cutting and repair applications. It is the hottest and most efficient fuel gas on the market,
Hobbyweld AL50 gas is designed for customers welding thicker sections of aluminium and requiring higher strength welds than what pure argon can provide. The customer will also experience a higher level of spatter and porosity control as well as greater weld speeds (by up to 50%). The Hobbyweld AL50 aluminium mix is a blend of 50% helium and 50% argon and is also suitable for welding other non-ferrous metals such as copper and titanium alloys.50% Argon / 50% Helium
If you own a TIG welder and you're looking to weld a wide range of materials - high purity argon is a great place to start (combined with the correct consumables, you can also use argon on a MIG welder). 99.995% Argon
The Ultra oxygen cylinder is perfect for the professional user, it's huge capacity and contents gauge means you're much less likely to run out over that busy weekend. Combined with a fuel gas - there are so many applications you can perform - cutting steel, soldering brass, welding steel.99.5% Oxygen
Argon is an inert shielding gas which is suitable for most TIG welding applications. It is most commonly used when welding aluminium and stainless steels in thin section.
Industrial grade oxygen is commonly used with a fuel gas for cutting, welding, brazing and soldering as it supports combustion and gives much higher flame temperatures than if air is used. For cutting with oxygen an oxy-fuel flame preheats the steel to its ignition temperature further to which gaseous oxygen flows onto the red-hot steel, generating more heat and melting the steel.
The Hobbyweld SS50 is a blend of 50% helium, 48% argon and 2% carbon dioxide. This gas is specifically manufactured for those welding stainless steel with a thickness in the range of 3 to 10mm and offers the best overall weld speed, spatter control, fusion and weld penetration. This gas is the industry standard for professional stainless steel welding applications
The trace gas mix comprises of 5% hydrogen and 95% nitrogen (oxygen free) to make a non-flammable, non-toxic gas which, when used with specialist hydrogen detection equipment can search for minute leaks. This process is up to 100 times more sensitive than common leak detection methods.
This refillable gas cylinder is typically used for domestic heating and cooking, larger mobile catering equipment as well as commercial heating and industrial processes.